ViVO T2 Pro 5G – Matte Finish Membrane Screen Guard (Pack of 2)

Here’s a step-by-step guide to installing the Matte Finish Membrane Screen Guard (Pack of 2) on your ViVO T2 Pro 5G:

Materials You Need:

• Matte Finish Screen Guard (from the pack)
• Microfiber cloth
• Dust removal sticker (often included)
• Applicator card (optional but useful)

Installation Steps:

1. Prepare the Work Area:
   • Ensure you are in a clean, dust-free environment to prevent particles from getting trapped under the screen guard.
2. Clean the Screen:
   • Use a microfiber cloth to thoroughly clean the screen, removing all fingerprints, dust, and smudges.
   • Use the dust removal sticker to pick up any tiny particles left on the screen.
3. Align the Screen Guard:
   • Without removing the adhesive backing, gently align the screen guard over your ViVO T2 Pro 5G screen to make sure it fits properly.
   • Ensure the cutouts for the speaker, camera, and sensors are aligned correctly.
4. Peel Off the Backing:
   • Slowly peel off the adhesive backing from the screen guard. Start from one edge.
5. Apply the Screen Guard:
   • Align one edge of the screen guard with the corresponding side of your phone’s screen.
   • Slowly lay it down across the screen while guiding it with your fingers.
6. Remove Air Bubbles:
   • Use an applicator card (or a flat, firm edge like a credit card) to gently press the screen guard from the center outward, pushing any air bubbles towards the edges.
   • If there are stubborn bubbles, lift the screen guard slightly and reapply.
7. Final Cleaning:
   • Once the screen guard is in place, use the microfiber cloth to clean the surface for a perfect matte finish.

Tips:

• Take your time during alignment to avoid any misplacement.
• If a bubble does form, it may disappear after a day or two as the adhesive settles.

Your ViVO T2 Pro 5G should now be well-protected with a smooth, matte screen!